HD SERIES & SB SERIES
MODEL |
HD
SERIES
HD10 |
SB
SERIES
SB5 |
SB8 |
SB10 |
|
Slurry Seal
/ Microsurfacing |
Slurry Seal
only |
Slurry Seal only |
Slurry Seal only |
Aggregate Capacity--yd3(m3)
|
10yd 3 (7.7
m 3 ) |
5yd 3 (3.9
m 3 ) |
8yd 3 (6.2 m 3 ) |
10yd 3 (7.7 m 3
) |
Emulsion Capacity--gallons(liters)
|
600 gallons
(2 270 liters) |
400 gallons
(1 515 liters) |
500 gallons (1 895
liters) |
600 gallons (2 270
liters) |
Water Capacity--gallons
(liters)
|
600 gallons
(2 270 liters) |
400 gallons
(1 515 liters) |
500 gallons (1 895
liters) |
600 gallons (2 270
liters) |
Fines Feeder--ft3
(liters)
|
10 ft 3 (280
liters) |
7 ft 3 (200
liters) |
10 ft 3 (280 liters) |
10 ft 3 (280 liters) |
Additive Tank--gallons(liters)
|
50 gallons
(l90 liters) |
50 gallons
(l90 liters) |
50 gallons (l90
liters) |
50 gallons (l90
liters) |
Production
Rate at emulsion perct.
|
4000
lb / min (1 800 kg/min) at 11%
2700 lb / min (1 230 kg/min) at 17% |
3,000
lb / min (1 360 kg/min)
at 10% |
3,000
lb / min (1 360 kg/min)
at 10% |
3,000
lb / min (1 360 kg/min)
at 10% |
|
Straight
Belt, variable gate for
calibration, hopper vibrator to
minimize bridging, automatic
shutdown of system when
aggregate is empty. |
Straight
Belt, variable gate for
calibration, hopper vibrator to
minimize bridging, automatic
shutdown of system when
aggregate is empty. |
Straight
Belt, variable gate for calibration, hopper vibrator
to minimize bridging, automatic
shutdown of system when
aggregate is empty. |
Straight
Belt, variable gate for
calibration, hopper vibrator to
minimize bridging, automatic
shutdown of system when
aggregate is empty. |
|
Variable
displacement,
Tri Rotor Pump, with hot
water jacketing, can be
used to load the paver. |
Fixed
Displacement,
Gear Pump, with hot
water jacketing, can be used
to load the paver. |
Fixed
Displacement,
Gear Pump, with hot
water jacketing, can be used
to load the paver. |
Fixed
displacement, Gear Pump, with hot
water jacketing, can be used
to load the paver. |
|
Recirculates |
Recirculates |
Recirculates |
Recirculates |
|
Twin
Paddle Shafts, variable speed and reversible. Replaceable
bottom shell and paddle tips. |
Single
Shaft Ribbon Mixer,
with bolt on carbide wear tips,
gatesto close mixer. |
Single
Shaft Ribbon Mixer,
with bolt on carbide wear tips,
gatesto close mixer. |
Single
Shaft Ribbon Mixer,
with bolt on carbide wear tips,
gatesto close mixer. |
|
Centrifugal
pump for pugmill,
spraybar and handhoses, follows speed ratio constant. Flowmeter for pugmilwater
flow. |
Centrifugal
pump for pugmill,
spraybar and handhoses |
Centrifugal
pump for pugmill,
spraybar and handhoses |
Centrifugal
pump for pugmill,
spraybar and handhoses |
|
Stainless
steel gear pump,
hydraulically driven, additive
injected into water stream,
variable speed. |
Optional,
12V DC electric pump |
Optional,
12V DC electric pump |
Optional,
12V DC electric pump |
|
Hydraulic
drive, with hydraulic
clutches |
Hydraulic
drive, with hydraulic
clutches |
Hydraulic
drive, with hydraulic
clutches |
Hydraulic
drive, with hydraulic
clutches |
|
Deutz, 88 (66) |
Hatz, 30 (22) |
Hatz, 30 (22) |
Hatz, 30 (22) |
|
Electronic |
Electronic |
Electronic |
Electronic |
CA or CT --inches
(mm)
Comments
|
132" CT
(3 359 mm)
[with 54" axle spacing]
Allows smaller turning radius |
102" CA
(2 590 mm)
Allows smaller turning radius |
95" CT
(2410 mm)
Allows smaller turning radius |
132" CT
(3 350 mm)
[with 54" axle spacing]
Allows smaller turning radius |
Operator Station
Placement
Comments
|
Low,
close to pavement
Operator is closer to the work |
Low,
close to pavement
Operator is closer to the work |
Low,
close to pavement
Operator is closer to the work |
Low,
close to pavement
Operator is closer to the work |
Optional Tag
Axle Placement
|
One
tag axle before drivers
|
|
|
|
Length-Feet
(mm) (machine only)
|
21.7 feet (6 604mm) |
14.8 feet (4 510mm) |
8 feet (2 440 mm) |
19.7 feet (6 005
mm) |
|
8 feet (2 440) |
8 feet (2 440mm) |
8 feet (2 440 mm) |
8 feet (2 440 mm) |
Height-Feet
(mm);
(above truck frame)
|
6.2
(1 880) |
5.4 feet (1 645mm) |
6 feet (1 830 mm) |
6 feet (1 830 mm) |
|
15,000 lbs (6 802
kg) |
8,050 lbs (3 660
kg) |
8,300 lbs (3 770
kg) |
9,200 lbs (4 180
kg) |
Front Axle
Cap. --lbs (kg);(conv.)
|
20,000 lbs (9 070
kg) |
10,000 lbs (4 454
kg) |
12,000 lbs (5 455
kg) |
16,000 lbs (7 270
kg) |
Front Axle
Cap. --lbs (kg);(cabover)
|
20,000 lbs (9 070
kg) |
13,000 lbs (5 910
kg) |
14,000 lbs (6 360
kg) |
20,000 lbs (9 070
kg) |
|
44,000 lbs (20 000
kg) |
22,000 lbs (10,000
kg) |
38,000 lbs ( 17
270 kg) |
44,000 lbs (20 000
kg) |
|
| MODEL |
M206 |
M210 |
M216 |
| Primary
Use |
Slurry Seal/Microsurfacing |
Slurry Seal/Microsurfacing |
Slurry Seal/Microsurfacing |
| Aggregate
Capacity--yd3(m3) |
6yd 3 (4.5m 3 ) |
10yd 3 (7.7m 3 ) |
16.5yd 3 (10m 3 ) |
| Emulsion
Capacity--gallons(liters) |
300 gallons (1 135 liters) |
600 gallons (2 270 liters) |
800 gallons (3 000 liters) |
| Water Capacity--gallons
(liters) |
300 gallons (1 135 liters) |
600 gallons (2 270 liters) |
800 gallons (3 000 liters) |
| Fines Feeder--ft3
(liters) |
8.5 ft 3 (240 liters) |
8.5 ft 3 (240 liters) |
8.5 ft 3 (240 liters) |
| Additive
Tank--gallons(liters) |
Stainless Steel, 55 gallons (200 liters) |
Stainless Steel, 55 gallons (200 liters) |
Stainless Steel, 55 gallons (200 liters) |
| Production
Rate at emulsion perct. |
4000 lb / min (1 800 kg/min) |
4000 lb / min (1 800 kg/min) |
4000 lb / min (1 800 kg/min) |
| Aggregate
System |
Belt over chain, variable rear
gate
for calibration, steep hopper walls
minimize bridging, automatic
shutdown of system when aggregate |
Belt over chain, variable rear
gate
for calibration, steep hopper walls
minimize bridging, automatic
shutdown of system when aggregate |
Belt over chain, variable rear
gate
for calibration, steep hopper walls
minimize bridging, automatic
shutdown of system when aggregate |
| Emulsion
Pump Design |
Fixed Displacement Gear Pump,
hot water jacketed, with emulsion
strainer. Optional pump available
to load the paver. |
Fixed Displacement Gear Pump,
hot water jacketed, with emulsion
strainer. Optional pump available
to load the paver. |
Fixed Displacement Gear Pump,
hot water jacketed, with emulsion
strainer. Optional pump available
to load the paver. |
| Emulsion
Pump Operation |
Starts and stops with Mix Start Switch |
Starts and stops with Mix Start Switch |
Starts and stops with Mix Start Switch |
| Mixer Type |
Twin Paddle Shafts, variable
speed
and reversible. Replaceable bottom
shell and paddle tips. |
Twin Paddle Shafts, variable
speed
and reversible. Replaceable bottom
shell and paddle tips. |
Twin Paddle Shafts, variable
speed
and reversible. Replaceable bottom
shell and paddle tips. |
| Water System |
Positive displacement roller
pump
for mixer water, variable speed with
gpm (lpm) readout. Independent
and hand hoses. |
Positive displacement roller
pump
for mixer water, variable speed with
gpm (lpm) readout. Independent
and hand hoses. |
Positive displacement roller
pump
for mixer water, variable speed with
gpm (lpm) readout. Independent
and hand hoses. |
| Additive
System |
Additive / Water mix system
with
independent positive displacement
pumps, (10:1 ratio) mixes before
entering pugmill, variable speed. |
Additive / Water mix system
with
independent positive displacement
pumps, (10:1 ratio) mixes before
entering pugmill, variable speed. |
Additive / Water mix system
with
independent positive displacement
pumps, (10:1 ratio) mixes before
entering pugmill, variable speed. |
| Jackshaft |
Hydraulic drive, with air clutches |
Hydraulic drive, with air clutches |
Hydraulic drive, with air clutches |
| Engine Make,
HP (kw) |
Cummins, 100 (75) |
Cummins, 100 (75) |
Cummins, 100 (75) |
| Control
System |
Air Logic |
Air Logic |
Air Logic |
CA or CT
--inches (mm)
Comments |
112" CA (2 840 mm)
short wheelbase, allows
maneuverability |
153" CT (3 885 mm)
[with 54" axle spacing]
allows larger legal weight capacity, ability to add tag axle under pugmill |
Trailor Mounted
Long wheelbase and multiple axles
maximum weight capacity |
Operator
Station Placement
Comments |
Height of truck frame allows
tag
axle under pugmil |
Height of truck frame allows
tag
axle under pugmil |
Height of truck frame allows
tag
axle under pugmil |
| Optional
Tag Axle Placement |
One tag after drive axles |
Up to two before drive axles, one after |
Two fixed axles, up to two axles |
| Length-Feet
(mm) (machine only) |
19.0 feet (5 790 mm) |
24.7 feet (7 520 mm) |
31.5 feet (9 600 mm) |
| Width-Feet
(mm) |
8.0 feet (2 240 mm) |
8.0 feet (2 240 mm) |
8.0 feet (2 240 mm) |
Height-Feet
(mm);
(above truck frame) |
6.3 feet (1 930 mm) |
6.3 feet (1 930 mm) |
6.3 feet (1 930 mm) |
| Empty Weight--lbs
(kg) |
12,200 lbs (5 540 kg) |
14,500 lbs (6 580 kg) |
15,500 lbs (7 030 kg)(paver only) |
| Front Axle
Cap. --lbs (kg);(conv.) |
12,200 lbs (5 540 kg) |
20,000 lbs (9 070 kg) |
N/A |
| Front Axle
Cap. --lbs (kg);(cabover) |
12,200 lbs (5 540 kg) |
20,000 lbs (9 070 kg) |
N/A |
| Rear Axle
Capacity(ies) |
22,000 lbs (10 000 kg) |
46,000 lbs (21 000 kg) |
75,000 lbs (34 100 kg) |
|
|
