HD & SB Series Comparison Sheet
MODEL
 HD SERIES
HD10		 SB SERIES
SB5		 SB8 SB10
Primary Use
 Slurry Seal / Microsurfacing Slurry Seal only Slurry Seal only Slurry Seal only
Aggregate Capacity--yd3(m3)
 10yd 3 (7.7 m 3 ) 5yd 3 (3.9 m 3 ) 8yd 3 (6.2 m 3 ) 10yd 3 (7.7 m 3 )
Emulsion Capacity--gallons(liters)
 600 gallons (2 270 liters) 400 gallons (1 515 liters) 500 gallons (1 895 liters) 600 gallons (2 270 liters)
Water Capacity--gallons (liters)
 600 gallons (2 270 liters) 400 gallons (1 515 liters) 500 gallons (1 895 liters) 600 gallons (2 270 liters)
Fines Feeder--ft3 (liters)
 10 ft 3 (280 liters) 7 ft 3 (200 liters) 10 ft 3 (280 liters) 10 ft 3 (280 liters)
Additive Tank--gallons(liters)
 50 gallons (l90 liters) 50 gallons (l90 liters) 50 gallons (l90 liters) 50 gallons (l90 liters)
Production Rate at emulsion perct.
 4000 lb / min (1 800 kg/min) at 11%
2700 lb / min (1 230 kg/min) at 17%		 3,000 lb / min (1 360 kg/min)
at 10%		 3,000 lb / min (1 360 kg/min)
at 10%		 3,000 lb / min (1 360 kg/min)
at 10%
Aggregate System
 Straight Belt, variable gate for
calibration, hopper vibrator to
minimize bridging, automatic
shutdown of system when
aggregate is empty.		 Straight Belt, variable gate for
calibration, hopper vibrator to
minimize bridging, automatic
shutdown of system when
aggregate is empty.		 Straight Belt, variable gate for calibration, hopper vibrator to minimize bridging, automatic
shutdown of system when
aggregate is empty.
Straight Belt, variable gate for
calibration, hopper vibrator to
minimize bridging, automatic
shutdown of system when
aggregate is empty.
Emulsion Pump Design
 Variable displacement,
Tri Rotor Pump, with hot
water jacketing, can be
used to load the paver.		 Fixed Displacement,
Gear Pump, with hot
water jacketing, can be used
to load the paver.		 Fixed Displacement,
Gear Pump, with hot
water jacketing, can be used
to load the paver.		 Fixed displacement, Gear Pump, with hot
water jacketing, can be used
to load the paver.
Emulsion Pump Operation
 Recirculates Recirculates Recirculates Recirculates
Mixer Type
 Twin Paddle Shafts, variable speed and reversible. Replaceable bottom shell and paddle tips. Single Shaft Ribbon Mixer,
with bolt on carbide wear tips,
gatesto close mixer.		 Single Shaft Ribbon Mixer,
with bolt on carbide wear tips,
gatesto close mixer.		 Single Shaft Ribbon Mixer,
with bolt on carbide wear tips,
gatesto close mixer.
Water System
 Centrifugal pump for pugmill,
spraybar and handhoses, follows speed ratio constant. Flowmeter for pugmilwater flow.		 Centrifugal pump for pugmill,
spraybar and handhoses		 Centrifugal pump for pugmill,
spraybar and handhoses		 Centrifugal pump for pugmill,
spraybar and handhoses
Additive System
 Stainless steel gear pump,
hydraulically driven, additive
injected into water stream,
variable speed.		 Optional, 12V DC electric pump Optional, 12V DC electric pump Optional, 12V DC electric pump
Jackshaft
 Hydraulic drive, with hydraulic
clutches		 Hydraulic drive, with hydraulic
clutches		 Hydraulic drive, with hydraulic
clutches		 Hydraulic drive, with hydraulic
clutches
Engine Make, HP (kw)
 Deutz, 88 (66) Hatz, 30 (22) Hatz, 30 (22) Hatz, 30 (22)
Control System
 Electronic Electronic Electronic Electronic
CA or CT --inches (mm)
Comments
 132" CT (3 359 mm)
[with 54" axle spacing]
Allows smaller turning radius		 102" CA (2 590 mm)
Allows smaller turning radius		 95" CT (2410 mm)
Allows smaller turning radius		 132" CT (3 350 mm)
[with 54" axle spacing]
Allows smaller turning radius
Operator Station Placement
Comments
 Low, close to pavement
Operator is closer to the work		 Low, close to pavement
Operator is closer to the work		 Low, close to pavement
Operator is closer to the work		 Low, close to pavement
Operator is closer to the work
Optional Tag Axle Placement
 One tag axle before drivers
Length-Feet (mm) (machine only)
 21.7 feet (6 604mm) 14.8 feet (4 510mm) 8 feet (2 440 mm) 19.7 feet (6 005 mm)
Width-Feet (mm)
 8 feet (2 440) 8 feet (2 440mm) 8 feet (2 440 mm) 8 feet (2 440 mm)
Height-Feet (mm);
(above truck frame)
 6.2 (1 880) 5.4 feet (1 645mm) 6 feet (1 830 mm) 6 feet (1 830 mm)
Empty Weight--lbs (kg)
 15,000 lbs (6 802 kg) 8,050 lbs (3 660 kg) 8,300 lbs (3 770 kg) 9,200 lbs (4 180 kg)
Front Axle Cap. --lbs (kg);(conv.)
 20,000 lbs (9 070 kg) 10,000 lbs (4 454 kg) 12,000 lbs (5 455 kg) 16,000 lbs (7 270 kg)
Front Axle Cap. --lbs (kg);(cabover)
 20,000 lbs (9 070 kg) 13,000 lbs (5 910 kg) 14,000 lbs (6 360 kg) 20,000 lbs (9 070 kg)
Rear Axle Capacity(ies)
 44,000 lbs (20 000 kg) 22,000 lbs (10,000 kg) 38,000 lbs ( 17 270 kg) 44,000 lbs (20 000 kg)